Model 3540 Portable Gauge Tester

Model 3540 Portable Gauge Tester
Description:

The Model 3540 Portable Pneumatic Gauge tester by King Nutronics Corporation is a compact, completely self-contained system designed for calibrating pressure gauges, transducers, controllers, and other pressure-sensitive instruments up to 2,000 psi with an accuracy of ±0.1% including hysteresis error. Two large, legible gauges, reading from 0 to 100 psig and 0 to 2,000 psig respectively, and controlled by an automatic transfer valve, permit precise stepless measurements over the entire range of the system.

Download Product Data Sheet
Ordering Information
Model 3540 Portable Gauge Tester
Features:
  • Two internal nitrogen cylinders, with a combined capacity of 180 cubic inches (14.2 std. cubic feet when charged to 2,250 psi at 70°F).
  • Easily transported to remote locationsno external gas or power sources are required.
  • Internal cylinders can be charged using any available high-pressure nitrogen source.
  • Safety features include “Blow-out back” master gauges to protect the operator, burst discs to guard against inadvertent overpressurization, and a relief valve designed to protect the test item and master gauges from damage.
  • A second control valve is used for venting, allowing precise downscale measurements to be performed.
  • Each temperature compensated gauge incorporates a stainless steel multi-coil Bourdon tube with a tip bleeder for maximum accuracy, and a mirrored scale to eliminate parallax.
  • Dual rotation of scale pointer provides a 32-inch scale length, ensuring easy readability throughout the full range of each gauge.
  • Housed in a weatherproof, compact, and rugged aluminum carrying case with a removable lid.
  • A pressure relief valve built into the storage case protects the system from internal gas leakage during storage.
Download Product Data Sheet
Ordering Information
Model 3540 Portable Gauge Tester
Specifications:
  • Range: 0 to 2,000 psig Standard*
    *Can be configured up to 3,000 psi
  • Accuracy: ±0.1% of Full Scale
  • Inlet Pressure: 3,000 psi (maximum)
  • Operating Medium: Dry Nitrogen or other inert gas
  • Master Gauges: 0 to 100 psig and 0 to 2,000 psig*
    *Other pressure ranges and scale units available upon request
  • Internal Cylinders: Two, 90 cubic inches each
  • Ports: Quick-Disconnect with Tethered Dust Caps
  • Plumbing: Stainless Steel
  • Hose:
    5 Feet
    Teflon-lined, stainless steel wire braid, with Quick-Disconnect fitting and ¼ AN swivel tube fitting
  • Dimensions & Weight:
    18”W x 12”D x 11”H
    36 lbs.
Download Product Data Sheet
Ordering Information
DESCRIPTION
Model 3540 Portable Gauge Tester
Description:

The Model 3540 Portable Pneumatic Gauge tester by King Nutronics Corporation is a compact, completely self-contained system designed for calibrating pressure gauges, transducers, controllers, and other pressure-sensitive instruments up to 2,000 psi with an accuracy of ±0.1% including hysteresis error. Two large, legible gauges, reading from 0 to 100 psig and 0 to 2,000 psig respectively, and controlled by an automatic transfer valve, permit precise stepless measurements over the entire range of the system.

Download Product Data Sheet
Ordering Information
FEATURES
Model 3540 Portable Gauge Tester
Features:
  • Two internal nitrogen cylinders, with a combined capacity of 180 cubic inches (14.2 std. cubic feet when charged to 2,250 psi at 70°F).
  • Easily transported to remote locationsno external gas or power sources are required.
  • Internal cylinders can be charged using any available high-pressure nitrogen source.
  • Safety features include “Blow-out back” master gauges to protect the operator, burst discs to guard against inadvertent overpressurization, and a relief valve designed to protect the test item and master gauges from damage.
  • A second control valve is used for venting, allowing precise downscale measurements to be performed.
  • Each temperature compensated gauge incorporates a stainless steel multi-coil Bourdon tube with a tip bleeder for maximum accuracy, and a mirrored scale to eliminate parallax.
  • Dual rotation of scale pointer provides a 32-inch scale length, ensuring easy readability throughout the full range of each gauge.
  • Housed in a weatherproof, compact, and rugged aluminum carrying case with a removable lid.
  • A pressure relief valve built into the storage case protects the system from internal gas leakage during storage.
Download Product Data Sheet
Ordering Information
SPECIFICATIONS
Model 3540 Portable Gauge Tester
Specifications:
  • Range: 0 to 2,000 psig Standard*
    *Can be configured up to 3,000 psi
  • Accuracy: ±0.1% of Full Scale
  • Inlet Pressure: 3,000 psi (maximum)
  • Operating Medium: Dry Nitrogen or other inert gas
  • Master Gauges: 0 to 100 psig and 0 to 2,000 psig*
    *Other pressure ranges and scale units available upon request
  • Internal Cylinders: Two, 90 cubic inches each
  • Ports: Quick-Disconnect with Tethered Dust Caps
  • Plumbing: Stainless Steel
  • Hose:
    5 Feet
    Teflon-lined, stainless steel wire braid, with Quick-Disconnect fitting and ¼ AN swivel tube fitting
  • Dimensions & Weight:
    18”W x 12”D x 11”H
    36 lbs.
Download Product Data Sheet
Ordering Information
WordPress Lightbox Plugin